So let’s get to it!.

We went with one of the kits where you get a basic wire and then you pour self-leveling cement over it to protect it and lock it in place..It seemed like it would be the most economical choice.

and also give us the most high-quality finished project.Cause we’re experts at this DIY stuff, right?.Although the project was a success and the kit wasn’t too hard to use, all the extra supplies that we ended up needing and all that cement we needed to fill all that square footage ate up any money that we saved by using this kit instead of the really really super duper easy kit.. You can get heated floor kits that are made up of an orange or black mat that already have the wire wound through it.

All you do is roll the mat out and lay your tile right on top!we do another heated floor,.

that’s definitely that style that we’ll go with.. As it went though, we did it all by hand.

First we used a glue gun with the special glue-stick provided in the kit to glue down all of the wire holders around the perimeter of the areas that we wanted heated.I just learned this trick and I think it’s so fun and something I never thought of before.

Just turn your ceiling fans on low and run them in a clockwise direction to help push warm air down.You could be able to turn your furnace down by as much as 2 degrees!

If you have ceiling fans at home, let me know how this works for you!We did this really simple update to a plain ol’ shelf that we picked up at Target a couple of weeks ago and I just had to show you because I’m so thrilled with the results.It’s not really anything too exciting, but that’s kind of what.